“We made research on different 2-Post Car Lifts for Garages on the market today and our team came to agree that APlusLift 2-Post Clear Floor Car Lift and STRATUS 2-Pole Convertible Car Lift are the Best 2-Pole Vehicle Lifts you should consider acquiring in 2022.”
List Of 5 Best 2-Post Car Lifts for Garages To Purchase In 2022:
#1-CHOICE: APlusLift 2-Post Overhead Auto Hoist Clear Floor Car Lift:
PRODUCT-FEATURES:
- 10,000LB Two-Post Car Lift.
- Time to full rise is: 50-seconds.
- An All Robot Welded Structure.
- Strong Double “S” Column Design.
- Symmetric and Asymmetric Car Lift.
- Durable Powder Coated Finish on Steel.
- Overhead Auto Hoist Clear Floor Car Lift.
- Rear 2 Stage reach from: 33 5/8″ to 52 7/8″.
- Hydraulic Oil: 3-to-5 gallons of AW32/AW46.
- Combo with Arm Assembly with Screw-in Pads.
- 6’9″ Lift Height Maximum with Truck Adapters.
- Front/Rear 3 Stage reach from 22 7/8″ to 42 5/8″.
- CE Certified Lift Structure and Hydraulic System.
- Includes: 4-pieces screw-in pads & truck adapters.
- Driving-Mode: Dual hydraulic cylinders & chain drive.
- Dimensions: 113″H x 22″L x 40″W & Weighs: 1450-Pounds.
- Motor: 220V Single Phase 3HP 10A (30A breaker recommend).
- Concrete Requirement: 6″ at 3500 psi (4″ for vehicles 9000LB & below).
- Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life.
- Control System: Lifting by pressing “UP” button, Manual lowering operation, Relief valve built in power pump to prevent overloading, etc.
- Heavy-Duty Design With: Column Steel Thickness of 13/64″, Carriage Steel Thickness of 15/64″, Arm Steel Thickness of 15/64″, Carriage Yoke Thickness of 5/16″ & Base Plate Steel Thickness of 5/8″.
- Safety Mechanisms Include: Double point safety lock release, Automatic arm lock restraints, Relief valve built in power pump to prevent overloading, Door guards protection rubber, Up-limit switch to protect cylinders working stroke used in safe length scope & Stiffened base plate with 5/8″ thickness.
- Adjustments: Overall-Height is 143 3/16″, Overall-Width is 134 5/16″, Maximum Lift height with Truck Adapters is 81″, Maximum Lift height without Truck Adapters is 75″, Minimum Height of Arm Top: is 4″, Carriage to Carriage Width (Drive-through clearance) is 100″, Column to Column Width is 109″, etc.
#2-CHOICE: STRATUS Asymmetric & Symmetric Convertible Clear Floor Overhead Direct Drive 2-Pole Car Lift:
PRODUCT-FEATURES:
- 2-Post Car Lift.
- 10,000-lbs Capacity Car Lift.
- Provides 2 Installation Methods.
- Asymmetric & Symmetric Car Lift.
- Lifting Time: ≤60s & Lowering Time: ≥40s≤50s.
- 4 Screw-up rubber pads & 8 truck-adapters included.
- Convertible Clear Floor Overhead Direct Drive Car Lift.
- CE Certified Direct Drive Clear Floor Overhead 10,000 lbs Capacity.
- Drive-Through (Symmetric) is 106 9/16″ & Drive-Through (Asymmetric): 101 3/16″.
- Motor Power: 3-HP, Motor-Voltage: 220-Volts, Rated Frequency: 60HZ & Phase: 1-PH.
- Proofed by dynamic test with 115% of rated capacity and static test with 150% rated capacity.
- Column Thickness of Steel: 5.5mm, Carriage Thickness of Steel: 4.75mm, Arms Thickness of Steel: 5.5mm & Cable Diameter: 0.323″.
- Dimensions: Overall-height is 152 3/4″, Width inside Column (Symmetric) is 118 1/2″, Width inside Column (Asymmetric) is 117 3/8″, Max Lifting Height is 78″ with truck adaptor & 74 7/8″ without truck adaptor & Min Height is 3 15/16″.
#3-CHOICE: XK-USA Two Post Lift Car for Cars & Trucks:
PRODUCT-FEATURES:
- 2-Post Lift for Cars & Trucks.
- Lifting Capacity Of: 10,000-lbs.
- Time to full rise is: 20-to-60 seconds.
- Stiffened base plate is: 5/8″ thickness.
- Anchor bolts & mounting hardware included.
- Motor-Type: 3HP Motor, 220-Volts, 60HZ & 1PH.
- Relief valve built in power pump to prevent overloading.
- Automatic lift operation by pressing “UP” button on motor.
- It also features manual lowering operation by pressing lever.
- The overall Height is 113-3/32, overall Width is 133-1/4″ & Column Width is 10.62″.
- Ultra high molecular self-lubricating nylon slider ensures carriage smooth moving up and down.
- Heavy duty 5/16″ diameter cable and 4.56″ pulley reduce high stress on synchronization process and increase cable life.
- Safety Mechanisms: Double Point Safety Lock Release, Automatic arm lock restraints, Relief valve built in power pump to prevent overloading, Door guards protection rubber & Up-limit switch to protect cylinders working stroke used in safe length scope.
- Base Width is 18.89″, Column Thickness of Steel is 3/16″, Carriage Thickness of Steel is 15/64″, Arms Thickness of Steel is 15/64″, Front-Arm: 27″~41-3/8″, Rear-Arm 33-1/4″~52-3/8″, Min pad height: 3-7/8″, Lift height max: 78-7/8″, Drive-thru width clearance: 100″.
#4-CHOICE: Bendpak XPR Dual-Width Low Profile Clearfloor 2 Post Car Lift:
PRODUCT-FEATURES:
- Dual-Width 2 Post Car Lift.
- A 10,000-lb lifting capacity.
- Padded overhead safety shutoff bar.
- Low Profile Clear-floor 2-Post Car Lift.
- Double-telescoping screw pads offer increased versatility.
- Asymmetric 2-Post lift with 24″ bolt on extension and Low Profile arms.
- Expandable top beam accommodates wide or narrow drive-thru configuration.
- It can handle anything from full-sized trucks to lowered sports cars or vehicles with custom ground effects.
- Clear floor installation provides an unobstructed workspace to accommodate tool boxes and maximize technician access.
- Asymmetric design provides columns that are rotated 30° to improve door opening clearance for access to vehicle interior.
#5-CHOICE: CHIEN-RONG CR 2 Post Lift Car for Cars & Trucks:
PRODUCT-FEATURES:
- Lifting Capacity: 10,000-lbs.
- The overall Height is: 145-1/2″.
- Drive through clearance of: 99.2″
- 2-Post Auto Lift for Cars & Trucks.
- Time to full rise: 20-to-60 seconds.
- Screw in pads and spacers are included.
- Stiffened base plate with 5/8″ thickness.
- Manual lowering operation by pressing lever.
- Lifting operation by pressing “UP” button on motor.
- Relief valve built in power-pump to prevent overloading.
- The overall Width is 131-1/2″ & Lift height maximum: 78-7/8″.
- Ultra high molecular self-lubricating nylon slider ensures carriage smooth moving up and down.
- Heavy duty 5/16″ diameter cable and 4.56″ pulley reduce high stress on synchronization process and increase cable life.
- Safety Mechanisms: Double Point Safety Lock Release, Automatic arm lock restraints, Relief valve built in power pump to prevent overloading, Door guards protection rubber, Up-limit switch to protect cylinders working stroke used in safe length scope.
- Other Specifications: Overall-Height is 141-5/16″, Overall-Width is 131-1/2″, Column Width is 10.62″, Base Width is 18.89″, Column Thickness of Steel is 3/16″, Carriage Thickness of Steel is 15/64″, Arms Thickness of Steel is 15/64″, Front-Arm from 30.7″-to-48″, Rear-Arm from 30.7″-to-48″, Min pad height: 3-7/8″, Lift height max: 78-7/8″ & Drive-thru width clearance: 99.2″.
CONCLUSION:
All the featured 2-Post Car Lifts for Garages are very durable, easy-to-use and facilitate for quick & smooth moving up and down of different vehicles in 2022.
RELATED POSTS:
+Best Brake Bleeders.
+Best 4 Post Car Lifts.
+Best Auto Paint Guns.
+Best Home EV Chargers.
+Best Car Battery Testers.
+Best BMW Code Readers.
+Best Car Power Inverters.
+Best Car Diagnostic Tools.
+Best Cordless Grease Guns.
+Best Aluminum Floor Jacks.
+Best Automotive Scan Tools.